|
r e g i s t e r
e d u s e r s
|
| How
to: Windows
CE 2.11 |
| |
Use the directions below to create a dial-up connection for
the
Windows CE 2.11 operating system.
|
| 1] |
Tap Start, then Program, then Communications, followed
by Connections.
|
| 2] |
Double-tap Make New Connection.
Note: If
your modem is not inserted, insert it now.
|
| 3] |
Type
"BAMnet" in the Type a name for the connection.
Select "Dial-Up Connection" under Connection
Type. Tap Next to continue.
|
| 4] |
Select
the appropriate modem from the list. Tap Configure.
Select the Port Settings tab from the top. Make sure the
"Baud Rate" is set at 115200. Tap OK (at
the top).
|
| 5] |
Tap TCP/IP Settings. Make sure Use server-assigned
IP address, Use software compression, and Use
IP header compression are all checked. Tap OK (at the top). Tap Next to continue.
|
| 6] |
Enter
Country code (for U.S., enter 1), Area Code, and Phone number. Tap Finish to complete the process.
Visit our Dial-Up
Number page and choose your desired dialup number.
Notes:
If dialing our U.S. 1-800 modem number, enter 800 as
the area code, then 737-7530 as the telephone number. If
dialing one of our non-800 style numbers (see
list), use the calling format that works for the area
you are in. For example, if no area code is required when
dialing, you might only need XXX-XXXX as the number to dial.
Each country/state have their own calling formats. For more
information on calling patterns including access from Hotels,
visit our Helpful Tips section in the upper right corner
of this page.
|
| 7] |
Test
the connection by dialing up.
Where do I
find the BAMnet connection?
Tap Start,
tap Programs, tap Communication, tap Connections.
The BAMnet icon should be there. Tap the BAMnet icon,
enter your user name and password and tap Connect.
Note: Add "@bamnet"
to the end of your user name. For example username@bamnet.
Important: do not
add ".com" to the end of @bamnet - this will not
work!
Once connected,
always remember to disconnect when finished using the Internet!
|
| What
do I do now? Upon a successful modem connection,
open the built-in Internet browser, or configure your device
for email, and start using the Internet. When finished browsing,
please remember to disconnect from BAMnet.
|
[return
to main page]
Copyright
© 2007 BAMnet Corporation. |
