r e g i s t e r
e d u s e r s
CE 3.0 (H/PC 2000)
Use the directions below to create a dial-up connection for
Windows CE 3.0 operating system.
Tap Start, then Settings, then Connections.
Tap New Connection.
your modem is not inserted, insert it now.
"BAMnet" in the Enter a name for the connection. Select
the appropriate modem from the list. Make sure the Baud
Rate is set at "115200". Tap Next.
Country code (for U.S., enter 1), Area Code, and Phone number. Tap Next.
Visit our Dial-Up
Number page and choose your desired dialup number.
If dialing our U.S. 1-800 modem number, enter 800 as
the area code, then 737-7530 as the telephone number. If
dialing one of our non-800 style numbers (see
list), use the calling format that works for the area
you are in. For example, if no area code is required when
dialing, you might only need XXX-XXXX as the number to dial.
Each country/state have their own calling formats. For more
information on calling patterns including access from Hotels,
visit our Helpful Tips section in the upper right corner
of this page.
the box next to Cancel call if not connected within.
Enter "120" in the seconds field.
Check the box next to Wait for dial tone before dialing.
the connection by dialing up.
Where do I
find the BAMnet connection?
tap Programs, and tap Connections. The
BAMnet icon should be there. Tap the BAMnet icon,
enter your user name and password and tap Connect.
Note: Add "@bamnet"
to the end of your user name. For example username@bamnet.
Important: do not add ".com"
to the end of @bamnet - this will not work!
always remember to disconnect when finished using the Internet!
do I do now? Upon a successful modem connection,
open the built-in Internet browser, or configure your device
for email, and start using the Internet. When finished browsing,
please remember to disconnect from BAMnet.
to main page]
© 2007 BAMnet Corporation.